News
Tbes Editorial Team
In short: a value-added shrimp programme is won or lost in the specification, not in the sample. Agree the shrimp content of the finished piece, the coating system, the raw material grade, the cooking or frying state and the net weight basis in writing before the first production run. In our experience most disputes on coated shrimp come from one of those five lines being left to interpretation.
This guide is for buyers developing private-label or foodservice lines: tempura and breaded shrimp, skewers, and shrimp fillings for hakau and shaomai. It assumes you already know the raw shrimp basics covered in our guides to shrimp count sizes and IQF versus block freezing.
Start from the finished product and work backwards. The table below lists the fields we ask for in every enquiry. A buyer who can answer them in one message saves two rounds of questions.
| Field | What to state | Why it matters |
|---|---|---|
| Product form | Tempura, breaded, skewer, dumpling filling | Sets the process line and the raw material cut |
| Raw shrimp | Species, size grade, peeled and deveined, tail on or off | Drives yield, count per pack and cost |
| Shrimp content | Minimum percentage of the finished piece | Controls coating ratio and label claims |
| Coating system | Batter, breading type, pre-fry or raw coated | Defines cooking instructions and shelf life |
| State at dispatch | Raw coated, par-fried or fully cooked | Decides food-safety claims and end-user handling |
| Piece weight and count | Target weight per piece, tolerance, pieces per carton | Sets portion control for your customer |
| Net weight basis | Net weight excluding any glaze, check method agreed | Prevents weight disputes on receipt |
There is no single global rule for coated shrimp. The most cited benchmark is American: the US standard of identity for frozen raw breaded shrimp requires not less than 50 percent shrimp material, and the FDA treats products below that level as imitation. That rule applies to products sold in the United States, so it is a reference point, not an EU or UK requirement. For the EU, the UK and Australia, what you must do is state the quantity of the shrimp ingredient on the label where it is named or emphasised. The UK FSA describes this as a quantitative ingredient declaration, required when the ingredient appears in or next to the name of the food. Many buyers still adopt a 50 percent floor as a quality baseline, and we can work to a higher figure if your positioning calls for it.
Under Regulation 1169/2011 Annex IX, where a food has been glazed, the declared net weight must be exclusive of the glaze. The UK FSA repeats the point for packaged foods in an ice glaze, which must show the drained net weight. In practice, write the net weight basis and the test method into the purchase order, and glaze to your specification. Our guide to glazing and net weight in the EU covers the arithmetic.
| Form | Typical decisions | Check before sign-off |
|---|---|---|
| Tempura shrimp | Straightened or natural curl, tail on, batter weight | Fry test result and crispness after holding time |
| Breaded shrimp | Round, butterfly or fantail cut, crumb type | Shrimp content by weight, coating adhesion |
| Shrimp skewers | Shrimp per skewer, stick length, marinade | Piece count per carton and seasoning declaration |
| Hakau and shaomai filling | Shrimp percentage in the filling, mince texture | Texture after steaming and moisture loss |
The finished piece can only be as good as the shrimp that goes into it. Codex Standard 92 for quick frozen shrimps or prawns covers raw, partially cooked and fully cooked shrimp, peeled or unpeeled, and is a sound base for the raw material clause. Add your own limits on size uniformity, defects and the agreed residue testing, and ask for the lot to be traceable to the raw material intake. Coated products hide defects that a raw pack would show, so incoming inspection matters more, not less.
Yes. OEM work is our normal mode. Send the recipe targets, shrimp content and pack format, and we confirm feasibility, minimum order and lead time with the quotation.
Pack design and brand artwork stay with the brand owner. We produce to your artwork and keep your programme confidential.
Send the filled specification table above with your target market. We return a development plan, sample timing and a costed proposal.
US eCFR, 21 CFR 161.175, frozen raw breaded shrimp, accessed 20 Nov 2026.
FDA, CPG Sec 540.450, imitation breaded shrimp, accessed 20 Nov 2026.
UK Food Standards Agency, packaging and labelling, accessed 20 Nov 2026.
Regulation (EU) 1169/2011, Annex IX point 5 (net weight and glaze), accessed 20 Nov 2026.
European Commission, Notice on the application of QUID (2017/C 393/05), accessed 20 Nov 2026.
Codex Alimentarius, CXS 92-1981, quick frozen shrimps or prawns, accessed 20 Nov 2026.
Last updated: 20 November 2026. By Tbes Editorial Team.
News
Pangasius als Weißfisch-Alternative für EU-Verarbeiter: Einsatzbereiche und Spezifikation
Die Nordsee-Kabeljauquote 2026 sinkt um 44 %. Wo tiefgefrorener Pangasius in ein EU-Weißfischsortiment passt, was sich an Rezeptur und Kennzeichnung ändert und welche Spezifikation Sie vereinbaren sollten.
Tbes Editorial Team
Our team is available to answer your questions. Please fill out the form and we'll be in touch shortly.
TBESFOOD COMPANY LIMITED
A member of TBES Group
Head Office: 2nd Floor, 81 Cach Mang Thang 8 Street, Ben Thanh Ward, Ho Chi Minh City, Vietnam
Branch: 62/29C Lam Van Ben Street, Tan Hung Ward, Ho Chi Minh City, Vietnam
Factory: Lot C1.1, Cau Cang Phuoc Dong Industrial Zone, Hamlet 5, Phuoc Dong Commune, Can Duoc District, Long An Province
Lao Factory: Lao Yeast Factory, Ban Naphasouk, Xaythany District, Vientiane Capital, Lao PDR
TBES FOOD PTE. LTD.
Singapore Address: 470 North Bridge Road, #05-12, Bugis Cube, Singapore 188735
Sister brands: TbesAgri frozen fruit · TBESBY brewer's yeast · Lao Yeast Factory industrial ethanol
© 2016–2026 TBESFOOD COMPANY LIMITED. All rights reserved.
EspañolPrivacyCookie settingsTBESFOOD COMPANY LIMITED, a member of TBES Group