News
Tbes Editorial Team
Buy by net raw weight and plan by cooked portion. The formula is purchase weight = portions x cooked portion weight divided by cooked yield. For 100 portions of 120 g cooked at an assumed 80 percent yield, the illustration gives 15 kg. No published pangasius yield exists in the sources read, so measure your own.
A menu states what lands on the plate. A purchase order states what arrives in the carton. Yield links the two. A culinary management textbook from Ontario gives the working formula: quantity needed equals the number of portions multiplied by the portion size, divided by the yield percentage. The same text gives the reverse: the number of portions equals the quantity on hand multiplied by the yield percentage, divided by the portion size.
The textbook takes the yield percentage from two kitchen tests. One is the cutting yield test, which measures what is left after trimming. The other is the cooking loss test, which measures what is left after heat. Its examples cover roast meat, so the pangasius numbers have to come from your own kitchen. This post gives the method and shows the arithmetic with assumed numbers that are marked as illustrations.
For frozen fillet the starting weight needs care. The glaze is declared on the pack and the net weight is stated without glaze. Plan on the net weight. If a delivery note shows a gross weight, deduct the glaze first, or the yield will look worse than it is. Our note on how net weight changes the cost of a quote shows the same logic from the buying side.
The sources read give a spread, and none is a catering standard. A German cookery magazine uses 300 g of skinless fillet for four small plates, which is about 75 g each as a starter. A UK fish merchant lists 150 g per person for cod and haddock fillet, 120 to 140 g for salmon and 110 g for sea bass, and calls about 140 g a typical portion of fish. A Mexican recipe page cooks 1.5 kg of white fish fillet for eight servings, about 190 g raw each by simple division. That page uses tilapia, so it shows a home-cooking size and not a pangasius rule.
| Use | Weight per portion | Basis |
|---|---|---|
| Starter or small plate | About 75 g raw | 300 g skinless fillet for 4 servings, ceviche recipe |
| Fish portion, merchant guide | 110 to 150 g, raw or cooked not stated | UK fish merchant guide, other species |
| Home main course | About 190 g raw | 1.5 kg fillet for 8 servings, tilapia recipe |
Treat these as a range to test, not a target. A canteen, an airline caterer and a restaurant will each set a different portion. Write your own number on the specification and base the order on it.
The table below uses assumed cooked yields of 80 and 75 percent. These are illustration values chosen to show the arithmetic. They are not measured pangasius yields and they should not go into a purchase order. Replace them with the result of your own cooking loss test.
| Cooked portion | Raw per portion at 80% yield | Total at 80% | Total at 75% |
|---|---|---|---|
| 110 g | 137.5 g | 27.5 kg | 29.3 kg |
| 130 g | 162.5 g | 32.5 kg | 34.7 kg |
| 150 g | 187.5 g | 37.5 kg | 40.0 kg |
Read the 130 g row as follows. Two hundred portions of 130 g come to 26 kg cooked. Divided by 0.80, the purchase weight is 32.5 kg of net raw fillet. If the true yield is 75 percent, the same menu needs 34.7 kg. A five point difference in yield moves the order by more than 2 kg in this example, which is why the test matters.
The reverse calculation works for stock on hand. With 20 kg of net raw fillet, a yield of 0.80 and a 130 g portion, the result is 20 x 0.80 / 0.13, or about 123 portions. This is also an illustration.
Run the test on the product and method you will use in service. A parcel, a pan-fry and a breaded fry can each give a different result, because moisture and coating change the finished weight. Breading adds weight, so state whether the portion weight includes the coating. The sources read do not give a cooking loss figure for pangasius, and a study on channel catfish should not be applied to it.
A three-run average smooths the natural spread between fillets. Keep the lowest run as a cross-check when you plan a tight budget.
Raw weight per portion decides the fillet size grade. In the 130 g example at 80 percent yield, each portion needs about 163 g of net raw fillet. A fillet whose average weight is close to that figure, or to a simple multiple of it, leaves little trim on the board. A fillet that is far larger forces you to cut it, and the cut ends may not match the plate.
Ask the supplier for the average fillet weight of each size grade and for the trim level. Our specification frame for trim levels and size grading lists the questions to ask. For packing and carton terms, see buying frozen pangasius fillets from Vietnam. A 2019 European market study notes that frozen fillets are usually sold IQF, in bulk for wholesalers and food service or in consumer packs, so the pack size you pick should divide cleanly into your service batches.
| Item | What to write down |
|---|---|
| Cooked portion weight | Grams, with or without coating |
| Cooked yield | Result of your own test, method and date |
| Weight basis | Net weight, glaze declared on the pack |
| Fillet size grade | Average fillet weight in grams |
| Carton | Net weight per carton from the specification |
| Order quantity | Portions x portion weight / yield, rounded up to whole cartons |
Divide the cooked portion weight by the cooked yield. For a 130 g portion at an assumed 80 percent yield, that is 162.5 g of net raw fillet. The 80 percent is an illustration. Measure your own yield by weighing fillet before and after cooking with your menu method.
No published pangasius figure was found in the sources read for this post. The textbook method takes yield from a cooking loss test, so each kitchen measures its own. The result depends on the method, the coating and the fillet size, so keep a record per dish.
It can, if the order is placed on gross weight. Frozen fillet carries a glaze that is declared on the pack, and the net weight is stated without glaze. Plan portions from the net weight, then check the delivery against the declared net weight.
Divide the total raw net weight by the net weight of one carton, then round up to whole cartons. Add a small allowance for the cooking loss test and for service waste, based on your own records. Ask the supplier for the carton net weight in the specification.
Send your specification (product, form, size, packing and destination) to TBESFOOD for a quote and timeline. Include your cooked portion weight and the cooking method, so the fillet size can be matched to your plate.
Read next
Our team is available to answer your questions. Please fill out the form and we'll be in touch shortly.
TBESFOOD COMPANY LIMITED
A member of TBES Group
Head Office: 2nd Floor, 81 Cach Mang Thang 8 Street, Ben Thanh Ward, Ho Chi Minh City, Vietnam
Branch: 62/29C Lam Van Ben Street, Tan Hung Ward, Ho Chi Minh City, Vietnam
Factory: Lot C1.1, Cau Cang Phuoc Dong Industrial Zone, Hamlet 5, Phuoc Dong Commune, Can Duoc District, Long An Province
Lao Factory: Lao Yeast Factory, Ban Naphasouk, Xaythany District, Vientiane Capital, Lao PDR
TBES FOOD PTE. LTD.
Singapore Address: 470 North Bridge Road, #05-12, Bugis Cube, Singapore 188735
Sister brands: TbesAgri frozen fruit · TBESBY brewer's yeast · Lao Yeast Factory industrial ethanol
© 2016–2026 TBESFOOD COMPANY LIMITED. All rights reserved.
EspañolPrivacyCookie settingsTBESFOOD COMPANY LIMITED, a member of TBES Group