One carrier lists a 40 ft high-cube reefer at 65.3 m3 usable and 29,260 kg payload, and a 20 ft reefer at 27.3 m3 and 27,470 kg. In the worked example below, carton volume sets the load before weight does. MOQ can mean a minimum production run or a minimum shipment, so ask which one a quote means.
MOQ is used for two different numbers. The first is the minimum production run for one pack, size and artwork. It is driven by line changeovers, packaging minimums and raw-material lots. The second is the minimum shipment, such as one container. A quote should say which number it means. If it does not, ask before you compare it with another offer. This is a general description of how the term is used, not a standard definition.
Carriers and lessors publish technical specifications. The figures below come from one carrier's reefer page and from a container lessor. Both are non-contractual, so confirm them with your carrier or forwarder.
| Container | Internal size (mm) | Usable volume | Max payload | Source |
|---|---|---|---|---|
| 20 ft reefer | 5,456 x 2,294 x 2,273 | 27.3 m3 (28.6 nominal) | 27,470 kg | One carrier |
| 40 ft high-cube reefer | 11,584 x 2,294 x 2,557 | 65.3 m3 (68 nominal) | 29,260 kg | One carrier |
| 40 ft high-cube reefer | 11,588 x 2,280 x 2,537 | about 67 m3 | 30,560 kg | A container lessor |
The two sources differ by about 1,300 kg in payload for a 40 ft high-cube, and slightly in size. Treat the figures as a guide and ask for the data of the actual unit.
Tonnage equals the number of cartons multiplied by the gross weight of one carton. The number of cartons depends on the carton footprint, the pallet pattern and the red load line. The example below is an illustration with stated assumptions. It is not a statement about any supplier's loading.
| Container | Cartons at 100 percent | Cartons at 85 percent | Gross weight at 85 percent |
|---|---|---|---|
| 20 ft reefer (27.3 m3) | 455 | about 387 | about 7.7 t |
| 40 ft high-cube reefer (65.3 m3) | 1,088 | about 925 | about 18.5 t |
In this illustration the payload limit is not reached in either container. A denser carton, with more weight in the same size, raises the tonnage until payload becomes the limit. Ask the supplier for a loading plan that uses your own carton and pallet pattern.
Carrier guidance for refrigerated cargo says frozen goods must be pre-frozen to the correct temperature before loading. The load must not pass the red load line or the end of the T-floor. Cartons should form a solid block without gaps to the walls, and packaging should allow vertical airflow. Palletised loads can be stacked up to 2.4 m with box corners supported and vents aligned. Codex standard CXS 190 sets the reference for quick-frozen fish fillets at -18 °C or colder at the thermal centre.
A reefer runs one temperature setpoint, so items can share a container only when they need the same carriage temperature. Mixed loads also need clear carton marking and a loading plan, so that each line can be identified on arrival. Confirm the combination with your forwarder and the supplier. Our guide to reefer containers for frozen pangasius covers loading, temperature and seals.
One carrier lists a 40 ft high-cube reefer at 65.3 m3 usable and 29,260 kg maximum payload. In the illustration above, about 925 cartons of 20 kg gross weight about 18.5 t. Real figures depend on carton size, pallet pattern and load line, so ask the supplier for a loading plan.
One carrier lists a 20 ft reefer at 27.3 m3 usable and 27,470 kg payload, and a 40 ft high-cube at 65.3 m3 and 29,260 kg. The 40 ft high-cube offers more than twice the volume, so it suits larger orders. A 20 ft unit suits smaller consignments.
MOQ can mean the minimum production run for one pack, size and artwork, or the minimum shipment, such as one container. These are different numbers. Ask the supplier which one applies, and whether mixed items can share a container when they need the same temperature.
Send your specification, with product, form, size, packing and destination, to TBESFOOD for a quote and timeline. State whether you need a full container or a mixed load, and we will confirm the loading plan with you.
Read next
Our team is available to answer your questions. Please fill out the form and we'll be in touch shortly.
TBESFOOD COMPANY LIMITED
A member of TBES Group
Head Office: 2nd Floor, 81 Cach Mang Thang 8 Street, Ben Thanh Ward, Ho Chi Minh City, Vietnam
Branch: 62/29C Lam Van Ben Street, Tan Hung Ward, Ho Chi Minh City, Vietnam
Factory: Lot C1.1, Cau Cang Phuoc Dong Industrial Zone, Hamlet 5, Phuoc Dong Commune, Can Duoc District, Long An Province
Lao Factory: Lao Yeast Factory, Ban Naphasouk, Xaythany District, Vientiane Capital, Lao PDR
TBES FOOD PTE. LTD.
Singapore Address: 470 North Bridge Road, #05-12, Bugis Cube, Singapore 188735
Sister brands: TbesAgri frozen fruit · TBESBY brewer's yeast · Lao Yeast Factory industrial ethanol
© 2016–2026 TBESFOOD COMPANY LIMITED. All rights reserved.
EspañolPrivacyCookie settingsTBESFOOD COMPANY LIMITED, a member of TBES Group