Share on

Why Shrimp Release Water on Pizza and How the Form You Buy Changes It

News

CN

Tbes Editorial Team

In short

Shrimp lose water when heated, and published cooking loss varies by method and species. One steaming trial on vannamei (30 minutes at 100 °C) recorded 7.24 percent cooking loss. A second study found loss depended on grade and method. No source gives a figure for pizza, so weigh your own shrimp before and after a bake.

Why do shrimp release water when they are heated?

Raw shrimp meat is mostly water held inside muscle protein. The usual explanation is that heat makes the protein contract, and the meat then gives up part of that water as liquid. The shrimp gets smaller and firmer. We have not cited a textbook for this mechanism, so read it as the general explanation and treat it as unmeasured for your product.

On a pizza the liquid has nowhere to go. It runs onto the cheese and sauce, and it can make a pale pool around each piece. Buyers see this as a watery pizza and often look to the shrimp supplier for a fix. The fix starts with understanding what each form of shrimp already carries when it arrives.

What do published studies show about cooking loss?

Cooking loss is the share of weight a shrimp loses between raw and cooked. We found two studies we could open. Neither tested pizza. Both show that the loss is not one fixed number, which is the main point for a buyer.

Cooking loss studies reviewed (neither tests pizza)
StudySpecies and sizeHeat treatmentWhat it reports
Steaming trial, university studyVannameiSteaming, 30 minutes at 100 °CCooking loss 7.24 percent; yield after complete peeling of fresh shrimp 61.92 percent
Food science journal studyBrown shrimp, grades 100/200, 200/300 and 300/500 per kg90 °C to a core of 85 °C by hot water, steam or microwave (400 W)Loss differed by grade; hot water gave the highest loss and microwave the lowest

The first study is a single trial on vannamei, so treat 7.24 percent as one data point, with no claim to be a norm. The second study used a different species and quoted its grades per kg. Its abstract page did not show percentages, so we report only the pattern: method and grade both changed the result. The two studies cannot be added together or averaged. They support one statement. Cooking loss depends on how, how long and at what size shrimp are heated.

A pizza oven is a dry heat with short exposure at high temperature, which differs from steaming or hot water. Do not apply either study to a pizza. Use them to understand why your own trial results may differ from another kitchen's.

Which factors change what you see on the pizza?

Water on a baked pizza comes from more than one place. Cooking loss is only one source. Before you blame the shrimp form, check the others in this list.

Where water on a shrimp pizza can come from (practical considerations)
SourceHow it reaches the pizzaWhat to check or ask
GlazeIce coating melts during thawing and adds surface waterGlaze declared on the pack; thaw, drain and pat dry before topping
Thaw dripLiquid leaves the meat as it thawsThaw method and time; drain the shrimp fully
Cooking lossLiquid leaves the meat as it heats in the ovenForm bought (raw, blanched or cooked), count and bake time
Other toppingsVegetables and sauce add their own liquidDrain or pre-cook wet toppings
Bake profileA long, cool bake gives liquid time to poolOven temperature, time, dough thickness

Glaze deserves special attention because it is easy to control. Order glaze to your specification, ask for the glaze to be declared on the pack and for net weight to be stated without glaze. Our note on shrimp glazing percentage covers how buyers check this.

We found no source that ties glaze, or any water-holding additive, to water release during baking. Do not assume an effect either way. If your specification allows additives, ask the supplier for a written declaration and test the product as delivered.

How does the form you buy change the water left to lose?

The form decides how much of the cooking loss has already happened before the shrimp reaches your oven. This is reasoning from the studies above and not a measured result on pizza.

  • Raw peeled and deveined (PD): none of the cooking loss has occurred. The shrimp loses water on the pizza, during the bake.
  • Blanched: part of the loss has occurred at the factory. The share depends on the heat step the supplier uses, so ask for the time and the core condition in writing.
  • Cooked: most of the loss has occurred before freezing. Less water remains to pool on the cheese. A long second heat can still firm up the meat.

Cooked shrimp also change the way a count is read, because the piece has already shrunk. Our guide to cooked vannamei shrimp explains the cooked forms. For the buyer, the rule is to state the count on the form that you will actually put on the pizza.

How do you measure water release in your own kitchen?

You do not need a laboratory. You need a scale, a tray and a fixed method. The result is a weight yield that you can compare across forms, counts and suppliers.

  1. Thaw the shrimp by the method your kitchen will use. Drain for a fixed time and pat dry.
  2. Weigh a fixed number of pieces. Record the weight as W1.
  3. Bake on a pizza with your standard recipe and profile.
  4. Lift the same pieces off the pizza, let them drain for a fixed time, and weigh again. Record W2.
  5. Calculate weight loss as (W1 minus W2) divided by W1, multiplied by 100.
  6. Repeat three times per form and use the average. Photograph the liquid on the cheese each time.

Illustration, with invented numbers: 24 drained pieces weigh 300 g before the bake (W1) and 255 g after (W2). The loss is 45 g, which is 15 percent of the starting weight. This is not a measured result for any product. It shows only how to read your own numbers.

Keep the count the same across tests, because size changes the result. If you need to convert between per-lb and per-kg counts, see our guide to shrimp count sizes. Counts such as 41/50 are per lb by trade convention.

What can you change on the line to cut the water?

Pizza makers use three practical levers, drawn from the general rule that wet toppings are drained or pre-cooked. First, remove surface water by draining and patting dry. Second, change the order: add shrimp near the end of the bake, or top the pizza with shrimp after it leaves the oven. Third, change the form and test a blanched or cooked shrimp against your raw product. A forum thread of pizzeria operators reports that some cooks use pre-cooked shrimp held in trays, while others prefer raw shrimp kept chilled. Their experiences differ because their ovens and doughs differ.

If you buy by the container, request samples of each form first and agree the specification after the trial. Ask us for the current specification for the forms you want to test. This section is general information, and the food safety limits for core temperature remain your own responsibility under the rules that apply where you produce the pizza.

FAQ

How much water do shrimp lose when cooked?

It varies. A steaming trial on vannamei, 30 minutes at 100 °C, recorded 7.24 percent cooking loss. Another study on brown shrimp found loss changed with grade and with method. No source gives one figure for pizza, so measure weight before and after baking.

Does glaze make shrimp pizza watery?

Melted glaze adds surface water if shrimp are topped while wet. Thaw fully, drain and pat dry. Order glaze to your specification, with the glaze declared on the pack and net weight stated without glaze. We found no study linking glaze to water release in the oven.

Which shrimp form releases the least water on a pizza?

By reasoning, cooked shrimp have the least water left to lose, raw peeled shrimp the most, and blanched shrimp sit between them. No source has measured this on pizza. Confirm with a weighed bench trial using your oven, your dough and the count you plan to buy.

Sources

Send your specification (product, form, count, packing and destination) to TBESFOOD for a quote and timeline. Include your bake profile so we can suggest which forms to sample.

Let's Talk

Our team is available to answer your questions. Please fill out the form and we'll be in touch shortly.

*Please share the details of your request, and if applicable, the specific product you're interested in.

Email us

export@tbesfood.com

Call or WhatsApp

+84 932 072 978

TBESFOOD COMPANY LIMITED

A member of TBES Group

Head Office: 2nd Floor, 81 Cach Mang Thang 8 Street, Ben Thanh Ward, Ho Chi Minh City, Vietnam

Branch: 62/29C Lam Van Ben Street, Tan Hung Ward, Ho Chi Minh City, Vietnam

Factory: Lot C1.1, Cau Cang Phuoc Dong Industrial Zone, Hamlet 5, Phuoc Dong Commune, Can Duoc District, Long An Province

Lao Factory: Lao Yeast Factory, Ban Naphasouk, Xaythany District, Vientiane Capital, Lao PDR

TBES FOOD PTE. LTD.

Singapore Address: 470 North Bridge Road, #05-12, Bugis Cube, Singapore 188735

Sister brands: TbesAgri frozen fruit · TBESBY brewer's yeast · Lao Yeast Factory industrial ethanol

© 2016–2026 TBESFOOD COMPANY LIMITED. All rights reserved.

EspañolPrivacyCookie settings
FacebookEmailWhatsApp

TBESFOOD COMPANY LIMITED, a member of TBES Group