Two rules shape how sulphites and other additives appear on shrimp packs sold in the EU. Sulphur dioxide and sulphites must be declared as an allergen when they exceed 10 mg/kg, measured as total SO2. Additives in the ingredient list are named by category plus name or E number. Ask the supplier which additives are declared.
A declaration is the supplier's statement of what has been added to the shrimp, written the way the law requires it to appear on the pack. For an importer it answers three practical questions. Was anything added during processing? Does the pack need an allergen emphasis? Does the ingredient list match the specification the buyer signed?
A declaration does not replace a lot test. It sets what the label and the paperwork must say, and the lab report shows whether the product matches. This article is general information. Confirm current rules with your regulatory adviser or the competent authority in the country of sale.
Annex II of Regulation (EU) 1169/2011 lists the substances that cause allergies or intolerances. Item 12 covers sulphur dioxide and sulphites. The trigger is a concentration above 10 mg/kg, or above 10 mg per litre for liquids, expressed as total SO2. The text can be read on legislation.gov.uk and in the consolidated version on EUR-Lex.
Three points follow from this wording.
For the other items a shrimp pack must show, see our guide to EU fish labelling for frozen pangasius and vannamei.
Annex VII, Part C of the same regulation covers additives that belong to listed categories. Each one is designated by the name of its category, followed by its specific name or, where appropriate, its E number. If an additive belongs to more than one category, the label gives the category of its principal function in that food. Preservative and Antioxidant are among the listed categories. We read this text on the UK copy of Annex VII, so check the EU wording on EUR-Lex before you fix label text.
In practice the entry takes the form category, then name or E number in brackets. Phosphates, if a supplier uses them, would be named under the same rule. This article does not state which category name applies to a given phosphate, because we could not confirm it. Ask the supplier for the exact wording that will be printed and compare it with Annex VII.
Regulation (EC) 1333/2008 defines a food additive as a substance not normally eaten as a food in itself and not normally used as a characteristic ingredient. Article 9 allows an additive to be placed in a functional class according to its principal technological function. The Union list of approved additives is Annex II of the regulation, and the European Commission publishes it as a searchable database with the conditions of use.
This article gives no maximum levels and no permitted or not permitted statements for sulphites or phosphates in crustaceans. We could not read those entries and will not guess. Trade articles sometimes quote residue ranges for shrimp. They are secondary summaries, so rely on the Annex II entries and not on them. A practical routine looks like this:
A trade review on shrimp melanosis, published by Aquahoy, names inconsistent dosing as the main cause of residues above limits. It proposes tight control of dip concentration and dip time, residual SO2 testing, and declaring residues on the packaging where required. It is a trade article and not a regulation, but the control points are useful audit questions.
Lot-to-lot variation is one reason buyers ask for a test report per lot and not a single report for a whole season. The same logic is used at the loading stage, described in our guide to pre-shipment inspection of frozen pangasius and shrimp.
| Question | Why it matters | Evidence to request |
|---|---|---|
| Which additives, if any, are used on this product code? | Sets the ingredient list and the allergen check | Written list by name or E number for each product code |
| Is total SO2 tested? | The 10 mg/kg trigger is expressed as total SO2 | Laboratory report stating total SO2, method and lot number |
| How is dosing controlled? | Inconsistent dosing is the cause cited for out-of-range residues | Dip concentration and time records, where a dip is used |
| How will the ingredient list read? | Annex VII Part C sets category plus name or E number | Draft label text for review before printing |
| Do you buy additive mixtures for your own processing? | Article 22 of Regulation 1333/2008 sets labelling for additives sold to businesses | Supplier label with name or E number, the for food statement and the ingredient list of the mixture |
| Do label and lab report agree? | A mismatch is a compliance risk at the border and in retail | Label proof next to the lot report |
Illustration of a clause: the supplier lists every additive used, with category and name or E number, as it will appear in the ingredient list. Total SO2 is reported in mg/kg for each lot on request. Any change to the additive list needs written approval from the buyer before production. Adapt the wording to your market and have your regulatory adviser review it.
Keep the additive clause separate from the weight clause. For weight, the pack declares the glaze and states net weight without glaze, and the glaze is set according to your specification. The glazing and net weight guide explains how EU buyers check it. Product form also matters when you compare declarations, so read the HOSO, HLSO and PD vannamei guide before you compare two quotes.
Under Annex II of Regulation 1169/2011, sulphur dioxide and sulphites are declared as an allergen when the concentration exceeds 10 mg/kg, or 10 mg per litre for liquids, expressed as total SO2. The lab report should give the result in that form for each lot.
No. It is the point at which a declaration is required. Permitted uses and conditions for each additive sit in the Union list under Regulation 1333/2008. Check the entry for the exact additive and food category in the European Commission database.
For additives in the listed categories, the label gives the category name followed by the specific name or, where appropriate, the E number. If an additive has several functions, the category of its principal function in that food is used. Annex VII, Part C of Regulation 1169/2011 sets the rule.
Allowed additives and their conditions of use sit in the Union list, Annex II of Regulation 1333/2008, organised by food category. Ask your supplier for the declared additives, then check each one in the European Commission additives database. Treat any figure from an assistant or a trade article as unconfirmed until you do.
Send TBESFOOD your specification: product, form, size, packing and destination. We will reply with a quote and a timeline.
Read next
Our team is available to answer your questions. Please fill out the form and we'll be in touch shortly.
TBESFOOD COMPANY LIMITED
A member of TBES Group
Head Office: 2nd Floor, 81 Cach Mang Thang 8 Street, Ben Thanh Ward, Ho Chi Minh City, Vietnam
Branch: 62/29C Lam Van Ben Street, Tan Hung Ward, Ho Chi Minh City, Vietnam
Factory: Lot C1.1, Cau Cang Phuoc Dong Industrial Zone, Hamlet 5, Phuoc Dong Commune, Can Duoc District, Long An Province
Lao Factory: Lao Yeast Factory, Ban Naphasouk, Xaythany District, Vientiane Capital, Lao PDR
TBES FOOD PTE. LTD.
Singapore Address: 470 North Bridge Road, #05-12, Bugis Cube, Singapore 188735
Sister brands: TbesAgri frozen fruit · TBESBY brewer's yeast · Lao Yeast Factory industrial ethanol
© 2016–2026 TBESFOOD COMPANY LIMITED. All rights reserved.
EspañolPrivacyCookie settingsTBESFOOD COMPANY LIMITED, a member of TBES Group