Share on

Preparing a Seafood Fair Visit: A Buyer's Checklist

News

CN

Tbes Editorial Team

In short

A fair visit works when each meeting has one goal. Tourism Australia advises clear objectives for every appointment, research on the other side and prepared questions. This checklist applies that advice to a seafood buyer: a suggested 12-week timeline, a question set and a notes template. The timings are a suggested framework, not a standard.

What should you decide before you choose a fair?

Start with the purchase, not the fair. Write down which product you need to source or replace, in what volume range, for which market and by when. A fair is a tool for meeting suppliers of that product. If the exhibitor list does not contain them, the trip will not serve your purpose.

Then set a result for the visit. Examples: three qualified suppliers with samples agreed, a verified document set from one supplier, or a decision to drop a supplier. A result you can state in one sentence makes it easy to judge afterwards whether the fair was worth the cost.

What is a sensible timeline before the fair?

The timeline below is a suggested framework, labelled as such because we found no published standard for seafood buyers. Adjust it to the size of the fair and the lead time for your visa. One point comes from the Tourism Australia guidance: have everything set up the day before your first appointment.

Suggested framework: preparation timeline for a buyer
WhenTaskOutput
12 weeks beforeConfirm dates, venue and hours on the organizer's site; decide whether to attendGo or no-go with a stated goal
10 weeks beforeRegister, check badge rules and visa lead timeRegistration confirmation
8 weeks beforeRead the exhibitor list and build a shortlistShortlist with a goal per company
6 weeks beforeSend your specification and a meeting request to each shortlisted companyAppointment requests sent
4 weeks beforeFinalise questions, notes template and document listMeeting pack
2 weeks beforeConfirm appointments in writing; book travel and hotelConfirmed schedule
Day before openingCheck badge, print or save the pack, plan the route between standsReady for the first appointment

Which organizer rules affect your plan?

Organizers publish rules that change how you work on the floor. The two examples below come from the organizers' own pages. They show the kind of rule you should look for at any fair.

Published rules at two seafood fairs, and what they mean for planning
RuleSeafood Expo Global (Barcelona)Conxemar (Vigo)Planning effect
AudienceQualified seafood professionals above the age of 16; not open to the publicB2B only; verified professionalsCheck that your company qualifies
BadgeOfficial badge required; not sharedPersonal badge; a ticket on arrival is exchanged for a badge valid for three daysRegister early or allow time at the entrance
VisaNo invitation letters; send your registration confirmationNo invitation letters; visitor badge and promotional materials may be usedStart visa steps early
SamplesMay not be removed from the exhibit floorNot covered on the page we readPlan shipped samples after the fair
Private meetingsKey Buyer Lounge meetings must be scheduled in advanceOnline B2B meetings page exists; content not readBook before you travel

The Seafood Expo Global organizer also advises attendees to plan their arrival and meetings accordingly. That is sound advice for any fair. It means arriving early, booking appointments and leaving gaps between them.

What belongs in a buyer's specification sheet?

A supplier cannot quote what you have not defined. A one-page sheet keeps your requests identical across meetings. Include these items:

  • Product and species, for example pangasius fillet or vannamei shrimp.
  • Form: fillet, whole, peeled, tail on or off, raw or cooked.
  • Size: fillet band in g, or shrimp count per lb. Count grades such as 16/20 or 41/50 follow the trade convention of pieces per lb.
  • Freezing and packing: IQF or block, inner pack, carton weight in kg.
  • Glaze: glaze to your specification, declared on the pack, net weight stated without glaze.
  • Destination market and the documents it requires.
  • Annual volume range and the planned order rhythm.

Which questions should you ask every supplier?

Prepared questions save time and make suppliers comparable. Keep the set short enough to cover in one meeting. Ask the same questions in the same order each time.

  1. What exactly is the product, and which raw material does it come from?
  2. How is size graded, and what tolerance applies?
  3. How is the net weight declared, and how is glaze handled on the pack?
  4. Which documents and test reports come with each shipment?
  5. How can a carton be traced back to a production date and lot?
  6. What does the supplier need from you to start: specification, label format, forecast?
  7. How long does it take from confirmed order to loading, and what can change that?
  8. Who is the single contact for questions after the fair?

What mistakes do buyers make at fairs?

The points below are practical observations, not findings from a study. They are easy to avoid when you plan ahead.

  • Arriving without appointments and hoping to find the right stand by chance.
  • Asking different questions at each stand, which makes later comparison unreliable.
  • Collecting brochures and business cards without writing down the agreed next step.
  • Scheduling meetings back to back, with no time to walk between stands or write notes.
  • Leaving the follow-up for the week after the return, when supplier staff are also catching up on their enquiries.

Most of these come down to the same remedy. Decide in advance what you need from each meeting, record it in the same format, and agree the next step before you leave the stand.

How do you run a meeting at the stand?

The Tourism Australia guide, written for tourism exhibitors, advises taking notes with a template and ending each meeting by summarising the follow-up actions and the agreed path. Both points work for a buyer. A meeting of 20 to 30 minutes is enough for a first conversation if you follow a fixed order:

  1. State your goal and the product in the first two minutes.
  2. Ask the supplier to describe the matching product and its specification.
  3. Go through your question set, row by row.
  4. Agree the sample plan: size, cost terms, dispatch and who to contact.
  5. Read your notes back and confirm what each side will send and by when.
Notes template: the same fields for every supplier
FieldWhat to record
Supplier and contactCompany, person, role, email, time of meeting
Product matchForm, size or count, packing, glaze declaration
DocumentsWhich certificates and test reports, and how they are supplied
SamplesSize, dispatch time, cost terms, contact
Lead timeTime from confirmed order to loading, and its conditions
Agreed next stepAction, owner, date

What should you do on the last evening?

Write up the day's notes the same evening. Rank the meetings against your goal and mark the suppliers who deserve a sample request. The Tourism Australia guide also advises that you send everything you promised. If you told a supplier you would send a specification or a photograph, send it before you fly home.

Our reports from earlier fairs show the exhibitor view of the same days, including Seafood Expo Global 2023, the Seoul Seafood Show 2024 and THAIFEX-Anuga Asia 2025. Entry, customs and import rules are general information here. Confirm current rules with your customs broker or the competent authority.

FAQ

How early should a buyer start preparing for a seafood fair?

No published standard sets a number. As a suggested framework, start about 12 weeks before the fair. That leaves time for registration, visa steps, a shortlist and meeting requests. Shorter fairs or nearby venues need less lead time. Confirm registration deadlines on the organizer's site.

Can I take samples home from a seafood fair?

It depends on the organizer. For its Barcelona show, the Seafood Expo organizer states that seafood samples may not be removed from the exhibit floor. Check the rule for your fair, and plan to request a shipped sample from the supplier after the show.

What is the most useful thing to bring to a seafood fair as an importer?

A one-page specification and a notes template. The specification keeps your requests identical in every meeting. The template lets you compare suppliers afterwards on the same fields. Add your registration confirmation, a list of confirmed appointments and the contact details of your customs broker.

Sources

Send the specification you need (product, form, size, packing and destination) to TBESFOOD for a quote and timeline. We will reply with a written offer and a proposed schedule for samples.

Let's Talk

Our team is available to answer your questions. Please fill out the form and we'll be in touch shortly.

*Please share the details of your request, and if applicable, the specific product you're interested in.

Email us

export@tbesfood.com

Call or WhatsApp

+84 932 072 978

TBESFOOD COMPANY LIMITED

A member of TBES Group

Head Office: 2nd Floor, 81 Cach Mang Thang 8 Street, Ben Thanh Ward, Ho Chi Minh City, Vietnam

Branch: 62/29C Lam Van Ben Street, Tan Hung Ward, Ho Chi Minh City, Vietnam

Factory: Lot C1.1, Cau Cang Phuoc Dong Industrial Zone, Hamlet 5, Phuoc Dong Commune, Can Duoc District, Long An Province

Lao Factory: Lao Yeast Factory, Ban Naphasouk, Xaythany District, Vientiane Capital, Lao PDR

TBES FOOD PTE. LTD.

Singapore Address: 470 North Bridge Road, #05-12, Bugis Cube, Singapore 188735

Sister brands: TbesAgri frozen fruit · TBESBY brewer's yeast · Lao Yeast Factory industrial ethanol

© 2016–2026 TBESFOOD COMPANY LIMITED. All rights reserved.

EspañolPrivacyCookie settings
FacebookEmailWhatsApp

TBESFOOD COMPANY LIMITED, a member of TBES Group