News
Tbes Editorial Team
A private-label order for frozen seafood typically follows eight steps: specification, quote, sample, artwork, printed proof, production, inspection and loading. The brand owner usually supplies the artwork and signs the proof in writing. The label must show the elements that EU rules list for fishery products. Printed packaging often sets the timeline, so agree each date in writing.
OEM means the factory produces to your specification. Private label means the pack carries your brand. The two overlap in practice. You define the species, form, size grade, net weight, glaze declaration and packing. The factory freezes, packs and loads the product. It keeps its own process and know-how, and you keep your brand, your artwork and your customer relationships. This is a general description of common practice, not a legal definition.
The sequence below is typical for a first private-label order. It is a general description, not a regulatory requirement. Durations are not shown because they depend on the product and on packaging supply, so agree them with the supplier in writing.
| Step | Who leads | Output | Sign-off |
|---|---|---|---|
| 1. Specification | Buyer | Species, form, size grade, net weight, glaze declared, packing | Written specification |
| 2. Quote | Factory | Quote with Incoterms 2020 rule, named place and payment term | Buyer accepts |
| 3. Sample | Factory | Pre-production sample | Buyer approves in writing |
| 4. Artwork | Buyer | Print-ready files checked against destination label rules | Both sides |
| 5. Printed proof | Packaging supplier and factory | Proof of carton and bag | Buyer approves in writing |
| 6. Production | Factory | Production run to the approved specification | Factory quality control |
| 7. Inspection | Factory, buyer or third party | Test results and inspection record | Release of the lot |
| 8. Loading | Factory and forwarder | Sealed container and transport documents | Documents issued |
Each sign-off should be written. A change after the packaging purchase can leave printed stock unusable, so freeze the specification and the artwork before the packaging order is placed.
In most arrangements the brand owner owns its artwork, logos and brand marks, while the manufacturer keeps its processes and know-how. Put this in the supply agreement. Cover what happens to printed packaging left over if the order ends, and who pays for it. Treat this as a contract point to confirm with your legal adviser, not as a fixed rule.
For prepacked fishery and aquaculture products, FSAI lists these elements under Article 35 of Regulation (EU) 1379/2013, together with the general food information in Articles 9 and 10 of Regulation (EU) 1169/2011:
State the net weight without glaze and declare the glaze on the pack. Rules for other destinations differ, and some markets require labels in the importer's language, so check each market before you finalise artwork. Our guide to EU fish labelling for pangasius and vannamei shrimp covers the European case in more detail. This is general information. Confirm current rules with your customs broker and the competent authority.
A blank pack is a plain, unprinted inner bag or master carton. Proposals commonly offer it so that production does not have to wait for final artwork. The factory can produce and hold product, or run a trial, and the brand owner applies labels or sleeves afterwards. Check that all mandatory label information is in place before the product is sold, and agree who does the work and where.
A BSI guidebook on BRCGS states that the certified organisation is the certificate holder, and that certification applies to products made or prepared at the audited site. A brand that sells product made at a certified site does not itself hold that certificate. Ask the factory for its current certificates and their scope, and read our overview of certifications for Vietnamese pangasius before you put any claim on your pack.
Typically you agree the specification, receive a quote, approve a sample, supply artwork and approve the printed proof. The factory then runs production, inspects and releases the lot, and loads the container. Each step needs written sign-off. This is a general description of common practice, not a regulatory requirement.
In most arrangements the brand owner owns its artwork, logos and brand marks, and the manufacturer keeps its processes. Write this into the supply agreement, including what happens to leftover printed packaging. It is a contract point to confirm, not a legal rule, so ask your legal adviser to review the wording.
Often yes, if the factory offers a blank pack. The product is made and held in plain packaging while you finish the artwork, and labels or sleeves are applied afterwards. Confirm in writing who applies the labels, where they are applied, and that the finished pack meets the destination label rules before sale.
Send your specification, with product, form, size, packing and destination, to TBESFOOD for a quote and timeline. We will reply with the points we need to confirm before the first sample.
Read next
Our team is available to answer your questions. Please fill out the form and we'll be in touch shortly.
TBESFOOD COMPANY LIMITED
A member of TBES Group
Head Office: 2nd Floor, 81 Cach Mang Thang 8 Street, Ben Thanh Ward, Ho Chi Minh City, Vietnam
Branch: 62/29C Lam Van Ben Street, Tan Hung Ward, Ho Chi Minh City, Vietnam
Factory: Lot C1.1, Cau Cang Phuoc Dong Industrial Zone, Hamlet 5, Phuoc Dong Commune, Can Duoc District, Long An Province
Lao Factory: Lao Yeast Factory, Ban Naphasouk, Xaythany District, Vientiane Capital, Lao PDR
TBES FOOD PTE. LTD.
Singapore Address: 470 North Bridge Road, #05-12, Bugis Cube, Singapore 188735
Sister brands: TbesAgri frozen fruit · TBESBY brewer's yeast · Lao Yeast Factory industrial ethanol
© 2016–2026 TBESFOOD COMPANY LIMITED. All rights reserved.
EspañolPrivacyCookie settingsTBESFOOD COMPANY LIMITED, a member of TBES Group