Pieces per portion equal the portion weight divided by the grams per piece. With the bands of one count guide, an 80 g portion of 26/30 shrimp (15 to 17 g a piece) holds about 5 pieces, and 41/50 (9 to 11 g) holds 7 to 9. Counts are per lb by trade convention.
No catering authority sets a standard shrimp portion, and none was found for this post. A kitchen therefore starts from its own target weight and works out the piece count. The arithmetic is short: pieces per portion equal the portion weight in grams divided by the average grams per piece. Shrimp counts are quoted per pound by trade convention, so the first step is to turn the count band into grams.
One independent count guide gives the average weight of a piece for each band, worked out from one pound divided by the count. The table below applies it to three portion weights. The portion weights are illustrations. They are chosen to show the method and are not recommended servings.
| Count per lb | Grams per piece | 60 g portion | 80 g portion | 100 g portion |
|---|---|---|---|---|
| 16/20 | 23 to 28 | 2 to 3 | 3 to 4 | 4 |
| 21/25 | 18 to 22 | 3 | 4 | 5 to 6 |
| 26/30 | 15 to 17 | 4 | 5 | 6 to 7 |
| 31/35 | 13 to 15 | 4 to 5 | 5 to 6 | 7 to 8 |
| 36/40 | 11 to 13 | 5 to 6 | 6 to 7 | 8 to 9 |
| 41/50 | 9 to 11 | 6 to 7 | 7 to 9 | 9 to 11 |
| 51/60 | 8 to 9 | 7 to 8 | 9 to 10 | 11 to 13 |
| 61/70 | 6 to 7 | 9 to 10 | 11 to 13 | 14 to 17 |
| 71/90 | 5 to 6 | 10 to 12 | 13 to 16 | 17 to 20 |
Read the 26/30 row. A piece weighs 15 to 17 g, so an 80 g portion holds between 4.7 and 5.3 pieces, which is 5 in practice. Individual shrimp vary inside a band, so a counted plate will differ by a piece or so. If the plate must carry an exact number, specify a narrower count range and check the average in a sample.
The count describes the product in the form it is sold. Head-on, headless shell-on, peeled and cooked shrimp each have their own scale. The same guide reports that head-on shrimp count about two sizes larger and shell-on shrimp one size larger than the same shrimp peeled. So a 26/30 shell-on shrimp and a 26/30 peeled shrimp are different animals on the plate.
This matters for the portion weight too. Decide whether your target is the weight of the shrimp meat on the plate or the weight bought. For shell-on product, the weight to buy is higher than the edible portion. Ask the supplier for the yield of the lot and divide the edible portion by that yield.
Raw and cooked add another step. Cooking drives out moisture, so a cooked shrimp weighs less than the raw one it came from. If you buy raw and serve cooked, run a short cooking loss test with your method and record the result, as a yield factor. Our guide to HOSO, HLSO and PD vannamei explains the forms, and the note on cooked vannamei specifications covers the cooked range.
Work from the plate backward. Multiply the covers by the portion weight to get the total weight on the plates. Divide by the edible fraction if the product is shell-on. Divide by the cooked yield if you buy raw and serve cooked. Then round up to whole cartons.
| Step | Calculation | Result |
|---|---|---|
| Weight on the plates | 100 x 80 g | 8.0 kg |
| Pieces at 26/30 (15 to 17 g) | 8,000 g / 17 g and 8,000 g / 15 g | about 470 to 533 pieces |
| Pieces at 41/50 (9 to 11 g) | 8,000 g / 11 g and 8,000 g / 9 g | about 727 to 889 pieces |
| Same plate weight bought shell-on | 8.0 kg / 0.625 | 12.8 kg |
| Cartons | Total weight / net carton weight, rounded up | From your specification |
The example assumes the shrimp is bought already peeled and served at the weight bought, with no cooking loss. If it is cooked in the kitchen, divide 8.0 kg by your measured yield to get the raw net weight. Frozen shrimp carries a glaze. The glaze is declared on the pack and the net weight is stated without glaze, so plan on net weight and check that the count refers to the shrimp. Our note on how EU buyers check net weight and glaze sets out the checks.
A menu line such as six shrimp describes pieces on the plate. A purchase grade such as 16/20 describes the size of the product bought. A menu may state only one of them, so do not infer the other. The count guide also warns that size names are not standardised and vary by seller. Write the count and the unit in your specification and leave the names out.
For a fixed number of pieces on the plate, a narrow count band gives a steadier result than a wide one. A 16/20 band holds shrimp of 23 to 28 g, a spread of 5 g. A 26/30 band spreads 2 g. On a plate of five pieces, that difference shows up as a visible gap in total weight. Ask the supplier for the average grams per piece of the lot, not only the printed range.
Send the list with your sample request. A supplier can then propose a band that lands close to your piece count. Check the first sample against the table: weigh 100 g, count the pieces and compare. If the count is outside the band, reject the sample and say so in writing. For the conversion between pounds and kilos, read shrimp count sizes explained.
It depends on your portion weight and the count. Divide the portion weight in grams by the grams per piece of the band. For an 80 g portion of 26/30 shrimp at 15 to 17 g a piece, the answer is about 5 pieces. For 41/50 at 9 to 11 g it is 7 to 9 pieces.
Decide this in the specification. State whether the portion weight refers to peeled meat or to the shell-on weight bought, and confirm the yield for your lot with the supplier.
Shrimp vary in size inside a band, and a table gives an average. A wide band such as 16/20 spreads the piece weight by about 5 g. Narrow the count range, ask for the average grams per piece of the lot, and weigh a sample.
It can, if weight is taken with the ice. The glaze is declared on the pack, and the net weight is stated without glaze. Compare counts on the shrimp itself, plan portions from net weight, and weigh a thawed, drained sample before you fix the order.
Send your specification (product, form, size, packing and destination) to TBESFOOD for a quote and timeline. Include your target weight or piece count per plate.
Read next
Our team is available to answer your questions. Please fill out the form and we'll be in touch shortly.
TBESFOOD COMPANY LIMITED
A member of TBES Group
Head Office: 2nd Floor, 81 Cach Mang Thang 8 Street, Ben Thanh Ward, Ho Chi Minh City, Vietnam
Branch: 62/29C Lam Van Ben Street, Tan Hung Ward, Ho Chi Minh City, Vietnam
Factory: Lot C1.1, Cau Cang Phuoc Dong Industrial Zone, Hamlet 5, Phuoc Dong Commune, Can Duoc District, Long An Province
Lao Factory: Lao Yeast Factory, Ban Naphasouk, Xaythany District, Vientiane Capital, Lao PDR
TBES FOOD PTE. LTD.
Singapore Address: 470 North Bridge Road, #05-12, Bugis Cube, Singapore 188735
Sister brands: TbesAgri frozen fruit · TBESBY brewer's yeast · Lao Yeast Factory industrial ethanol
© 2016–2026 TBESFOOD COMPANY LIMITED. All rights reserved.
EspañolPrivacyCookie settingsTBESFOOD COMPANY LIMITED, a member of TBES Group