News
Tbes Editorial Team
Frozen pangasius and shrimp should sit at -18 °C or colder at the thermal centre, in storage and in transport. EU quick-frozen rules tolerate only brief rises of up to 3 °C in transport. The printed date and storage statement on the pack set the shelf life, so ask for logger records and check core temperature on receipt.
The Codex Code of Practice for Fish and Fishery Products sets the reference for frozen fish at -18 °C or colder at the thermal centre, the warmest point inside the product. Quick freezing counts as complete only when the core reaches that value after the temperature has stabilised. The same Code asks that frozen storage facilities can hold -18 °C and that transport vehicles keep frozen product at -18 °C or colder.
EU quick-frozen rules add a tolerance. Directive 89/108/EEC asks for the product to be held at -18 °C or lower at all points and allows brief upward fluctuations of up to 3 °C during transport. Treat it as room for a short event such as a door opening. A similar 3 °C tolerance covers local distribution and retail cabinets, and a Member State may allow up to 6 °C in retail display cabinets only.
This is general information. The Directive text cited here is the 1989 act, so confirm the current rules with your customs broker and the competent authority.
| Control point | Reference value | Basis |
|---|---|---|
| Thermal centre after freezing | -18 °C or colder | Codex Code of Practice; Codex CXS 190 |
| Storage facility | Able to hold -18 °C | Codex Code of Practice |
| Transport vehicle | -18 °C or colder | Codex Code of Practice |
| Fluctuation in transport | Brief rise of up to 3 °C | Directive 89/108/EEC, Art. 5(1) |
| Label storage statement | -18 °C or colder | Codex CXS 190 |
| Lot records | Kept longer than the shelf life | Codex Code of Practice |
Temperature events often happen at hand-over points. These are the places to ask about:
Our guide to loading a reefer container with frozen pangasius covers the factory side of the first two points.
Warm or long storage has two effects that Codex names. Dehydration, the moisture loss that shows as freezer burn, can occur when product is not properly glazed, packaged or stored. Rancidity risk rises when storage time is too long, the temperature is too high, or both. A protective glaze helps against dehydration. Declare it on the pack within the 0 to 20 percent range and state net weight without glaze.
The producer sets the date of minimum durability under the label rules. The printed date and the storage statement are the reference, together with the specification you agreed. For fillet and shrimp alike, ask for the date and storage conditions in writing.
Label content differs by pack type. Under Directive 89/108/EEC a consumer pack carries the sales name with "quick-frozen", the date of minimum durability, the storage period and temperature, a batch reference and the warning not to refreeze after defrosting. A pack not meant for consumers carries the sales name, net quantity, batch reference and the manufacturer or packer name and address. See our note on EU fish labelling for pangasius and vannamei for the full list.
Agree these steps in the contract before the first order. The checks that happen before the container is sealed are in our pre-shipment inspection guide.
Codex texts set -18 °C or colder at the thermal centre for frozen fish, and ask storage and transport to hold that value. EU quick-frozen rules allow only brief rises of up to 3 °C in transport. Always follow the storage statement printed on the pack.
EU rules tolerate brief rises of up to 3 °C in transport, and otherwise expect -18 °C or lower at all points. Repeated or long excursions raise the risk of dehydration and rancidity, which Codex both names. Ask for the logger trace to see how long any rise lasted.
The producer sets the date of minimum durability under the label rules. The date and storage conditions printed on the pack, and the agreed specification, are the official reference. Do not rely on generic ranges from articles.
Ask for the transport data-logger trace, the lot code, the production date and the date of minimum durability. Codex says lot identification is essential to an effective recall and that records should be kept longer than the shelf life, so agree a retention period in the contract.
Send TBESFOOD your specification: product, form, size, packing and destination. We will reply with a quote and a timeline.
Our team is available to answer your questions. Please fill out the form and we'll be in touch shortly.
TBESFOOD COMPANY LIMITED
A member of TBES Group
Head Office: 2nd Floor, 81 Cach Mang Thang 8 Street, Ben Thanh Ward, Ho Chi Minh City, Vietnam
Branch: 62/29C Lam Van Ben Street, Tan Hung Ward, Ho Chi Minh City, Vietnam
Factory: Lot C1.1, Cau Cang Phuoc Dong Industrial Zone, Hamlet 5, Phuoc Dong Commune, Can Duoc District, Long An Province
Lao Factory: Lao Yeast Factory, Ban Naphasouk, Xaythany District, Vientiane Capital, Lao PDR
TBES FOOD PTE. LTD.
Singapore Address: 470 North Bridge Road, #05-12, Bugis Cube, Singapore 188735
Sister brands: TbesAgri frozen fruit · TBESBY brewer's yeast · Lao Yeast Factory industrial ethanol
© 2016–2026 TBESFOOD COMPANY LIMITED. All rights reserved.
EspañolPrivacyCookie settingsTBESFOOD COMPANY LIMITED, a member of TBES Group