News
Tbes Editorial Team
A reefer container's controller logs supply air, return air and any cargo probe readings, plus alarms and events. The standard logging interval is one hour, and the controller keeps values for more than a year. Ask for a download at discharge, because a log is hard to retrieve after the container has moved on.
Modern reefer controllers act as data loggers. According to the GDV Container Handbook, a logger records supply air and return air temperature, alarms, ambient temperatures, pre-trip inspection results and cargo probe readings. The standard logging interval for temperature is one hour. Events such as alarms and defrost cycles are saved separately from the temperature series.
The values are discrete. Depending on type and programming, each entry is a snapshot or an average over the interval. A logger therefore shows temperature at the moments when it wrote a value, and it does not draw a continuous line. Keep this in mind when you read a download. Two readings an hour apart say nothing certain about the minutes between them.
Supply air leaves the cooling unit and enters the cargo space. Return air comes back from the cargo space to the unit. For frozen cargo the two series answer different questions. Supply air shows what the unit is delivering. Return air gives a view of the air that has passed over the load. Probe readings, where fitted, add a third reference. The handbook describes these three series as the usual content of the controller log.
Circular chart recorders used a paper chart that ran for 31 days and usually recorded return air only. The handbook states that they are rarely fitted to new containers, because they no longer meet EU standards and are costly. A considerable share of reefers now rely only on a data logger. Controllers save measured values for more than a year, and they also record on and off times and manual interventions.
This changes what a buyer can ask for. A paper chart could be handed over at the terminal. A controller log sits inside the unit and has to be downloaded by someone with the right equipment. The handbook notes that in a claim it can be difficult to locate the container and have its logger read out. It also points out that discrete values give no quick view of the history of a shipment.
Agree the temperature record in the sales contract or the booking instructions, not after arrival. The list below is a practical request set. Each item is something to ask for. It is not a promise that a given carrier offers it.
The handbook mentions that a carrier extract exists, but it gives no step-by-step reading method. The table below is a reading frame built from the fields the handbook lists. It is an illustration of the questions to put to any download, and it carries no values.
| Field | What to look for | Question to ask |
|---|---|---|
| Set point | Value recorded at the start of the voyage | Does it match the booking and the sales documents? |
| Supply air series | Steady readings through the voyage | Are there gaps or unexplained steps in the series? |
| Return air series | Readings after loading and after any event | Does return air follow supply air after each event? |
| USDA probe readings, where fitted | Readings at the probe positions | Do the probes agree with return air over the voyage? |
| Alarms and events | Time and type of each alarm or defrost cycle | Is each alarm explained by the carrier? |
| On and off times, manual interventions | Power interruptions and manual changes | Who changed a setting, and when? |
| Pre-trip inspection result | Result recorded before loading | Was it recorded, and did it pass? |
| Container number and date stamps | Start and end dates of the file | Do they match the bill of lading? |
Read the file in a fixed order. Check the container number and the dates first. Compare the set point with the contract. Then read the list of alarms and events, and match each event to the temperature series around it. An alarm followed by readings that return to the set point is a different finding from an alarm followed by a drift. Record which one you see, and keep the file in its original form.
A controller log describes the air that the unit measures. It does not describe the temperature inside a carton. It does not show how the cargo was handled before loading, or after the container was unplugged on land. Because the values are discrete, a short event can fall between two entries. Treat the log as one record, to be read together with the loading record, the seal check and the physical inspection on arrival.
A logger placed in the cargo by the shipper or the buyer is a separate record from the carrier's controller log. The research behind this guide did not cover that type of device. If you plan to use one, agree in advance on the owner, the reading interval, the file format and the person who reads it, and put the agreement in writing.
Authority guidance on receiving frozen food centres on simple checks. A factsheet from FSANZ says that food delivered frozen must be frozen and not partly thawed, that packaging must be intact, and that the use by date must be valid. That page gives no numeric limit for frozen product. A logger download adds the time and temperature history to those checks. Our EU shipment readiness checklist lists the documents that sit beside it. Who pays for a download, and who carries risk during the voyage, depends on the Incoterm; see our guide to FOB, CFR and CIF.
A short checklist for the day the container arrives:
It records supply air and return air temperature, alarms, ambient temperatures, pre-trip inspection results and cargo probe readings, according to the GDV Container Handbook. The standard interval for temperature is one hour, and events such as alarms and defrost are saved separately. Entries are discrete values, so the log is a series of points and not a continuous line.
The handbook states that controllers save measured values for more than a year. That period does not make retrieval easy. In a claim it can be difficult to locate the container and have its logger read out, so request the download soon after discharge and quote the container number in the request.
You may be able to, but it is harder. The log sits in the container's controller, and someone with the right equipment must download it. Ask your forwarder or the carrier's agent, quote the container number and the dates, and state the reason. Next time, write the download request into the booking instructions.
Circular chart recorders with 31-day charts are rarely fitted to new containers, according to the handbook, because they no longer meet EU standards and are costly. Most buyers will receive a controller log and not a paper chart. Confirm with the forwarder what record the carrier provides when you make the booking.
Send the specification (product, form, size, packing and destination) to TBESFOOD for a quote and timeline. State in the request any temperature record you need with the shipment, so it can be raised with the forwarder at booking.
Our team is available to answer your questions. Please fill out the form and we'll be in touch shortly.
TBESFOOD COMPANY LIMITED
A member of TBES Group
Head Office: 2nd Floor, 81 Cach Mang Thang 8 Street, Ben Thanh Ward, Ho Chi Minh City, Vietnam
Branch: 62/29C Lam Van Ben Street, Tan Hung Ward, Ho Chi Minh City, Vietnam
Factory: Lot C1.1, Cau Cang Phuoc Dong Industrial Zone, Hamlet 5, Phuoc Dong Commune, Can Duoc District, Long An Province
Lao Factory: Lao Yeast Factory, Ban Naphasouk, Xaythany District, Vientiane Capital, Lao PDR
TBES FOOD PTE. LTD.
Singapore Address: 470 North Bridge Road, #05-12, Bugis Cube, Singapore 188735
Sister brands: TbesAgri frozen fruit · TBESBY brewer's yeast · Lao Yeast Factory industrial ethanol
© 2016–2026 TBESFOOD COMPANY LIMITED. All rights reserved.
EspañolPrivacyCookie settingsTBESFOOD COMPANY LIMITED, a member of TBES Group